About SpeedyBee F7 V3 Stack:
Experience 33% faster wireless data transfer with the upgraded FC ESC tuning system, allowing you to update firmware wirelessly in just one minute and configure any setting for Betaflight, Emuflight, or INAV via Bluetooth. Enjoy solder-free installation with dual options: one side features plug ports for your digital video transmitter, receiver, camera, VTX, and GPS, along with 4 LED plugs, while the other side allows for custom soldering. Our 50A 4-in-1 upgraded ESC delivers real 50A output, supports up to 128kHz PWM, includes a CNC heat sink, 1500uF low ESR capacitor, and TVS protective diode, and enables wireless motor direction changes. Retrieve Blackbox data in just one minute with our optimized Bluetooth/WiFi chip, and download your flight data in 20 seconds using your smartphone, with 500MB of onboard Blackbox flash memory. Additional features include support for up to 8 motors, built-in 4 LED plugs, and a 4-level battery life indicator. For assistance, scan the QR code or get help via the Speedybee APP.
Features:
● Wireless FC ESC Tuning: 33% faster wireless data transfer than the last version. Update FC firmware wirelessly in just 1 minute! Connect via Bluetooth and fully configure any setting for Betaflight/Emuflight/INAV.
● Solder-free Installation: Come with two installation methods,one side has plugs port for your digital video transmitter, receiver, camera, VTX, and GPS,4x LED plugs. Another side for soldering by yourself.
● 50A 4-in-1 Upgraded ESC: Real 50A output, Up to128KHz PWM, CNC heat sink,1500uF Low ESR capacitor, TVS protective diode,Change Motor Direction Wirelessly.
● Get Blackbox Data in 1 Minute: With an optimized Bluetooth/WiFi chip, you just need to take your smartphone out, connect, and download your flight in 20 seconds.Come with 500MB super huge onboard Blackbox flash memory.
● More Features& Warranty:Support up to 8 motors,Built-in 4 x LED plugs,Onboard 4-level battery life indicators. Feel free to contact us for help by scanning the QR code,or get help on Speedybee APP.
Specifications:
● Model: F7 V3 Flight Controller
● Power Output:
1) 10 groups of 5V output, three +5V pads and 1 BZ+ pad (used for Buzzer) on the front side, and 6 +5V output included in the connectors on the bottom side. The total current load is 2A.
2) 2 groups of 9V output, one +9V pad on the front side and the other included in a connector on the bottom side. The total current load is 4A.
3) Supported. Designed for receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load Supported. Designed for 3.3V-input receivers. Up to 500mA current load.
● WiFi Support, used for data transfer, e.g firmware flashing, and Blackbox analysis.
● I2C: Supported. SDA & SCL pads on the front side. Used for magnetometer, sonar, etc.
● Support Flight Controller Firmware: BetaFlight(Default), EMUFlight, INAV
● ESC signal M1 - M4 on the bottom side and M5-M8 on the front side.
● LED: Used for WS2812 LED controlled by Betaflight firmware.
● UART: 5 sets (UART1, UART2, UART3, UART4, UART6)
● DJI Air Unit plug: A full DJI Air Unit JST slot onboard
● BLE Support, used for Flight Controller configuration
● Buzzer: BZ+ and BZ- pad used for 5V Buzzer
● Mounting: 30.5x30.5mm, 4mm hole size
● Dimensions: 41(L) x 38(W) x 8.1(H)mm
● OSD: BetaFlight OSD w/ AT7456E chip
● BlackBox: 500MB onboard data flash
● BetaFlight Camera Control Pad: Yes
● ESC Telemetry: UART UART4 RX
● Power input: 3S - 6S Lipo
● Target: SPEEDYBEEF7V3
● SmartPort: Supported
● Baro: BMP280 (I2C)
● MCU: STM32F722
● Boot button: Yes
● RSSI input: Yes
● IMU: BMI270
● USB: Type-C
● Weight: 9G
● Model: 50A BLHELI_32 128K ESC
● Current Sensor: Supported (Scale=490 Offset=0)
● Mounting: 30.5x0.5mm, 4mm hole size
● Dimension: 45.6(L)x40(W)x8.8mm(H)
● Firmware: SpeedyBee BL32 50A
● Weight: 19.2g with heat sink
● Continuous Current: 50Ax4
● Power input: 3S - 6S LiPo
● Burst Current: 55A(5S)
● Power output: VBAT
Product recommendation:
● MEPS 2207 brushless motor
● MEPS 5145 FPV propeller
Package included:
● 1* SpeedyBee F7 V3 ESC&FC Stack
