MEPS SZ F7 HD Flight Controller:The Most Popular F7 Flight Controller Chip. There are three different variants for the F7 MCU. STM32F745/STM32F722/STM32F65
STM32F745 is a common F7 processor in FC, very decent clock speed and memory, however it also has a pretty large package, so if there is a lot of feature you want to have on the FC, the F745 probably wouldn’t fit.
STM32F722 is a smaller F7 MCU which was used on MEPS F7 HD Flight Controller but with less flash memory and RAM. In fact the F722 is the most popular F7 chip in flight controllers as they are also cheaper than F745.
STM32F65 is the most powerful F7 processor used in FC, in almost every aspects. However it’s even bigger and more expensive than F745, therefore it’s not a very popular option.
MEPS F7 HD Flight Controller is featured to provide better support for various sensors and peripherals.
Equipped with HD OSD, perfectly customized for Dji HD VTX system.
SZ F7 HD Flight Controller can support 3-6S voltage input, suitable for both 5V/2A and 10V/2A battery power supply.
Giving racer a smootheroperating experience,SZF7 HD cancapture and process high-qualityimages and videos quicker.
Aerial Photography: As an excellentaccessory for capturing fantasticaerial footage with your drone,SZF7 HD offers low-latency and HDvideo feed capabilities.
Why should you choose the MEPS F7 HD Flight Controller?
Plug-in-Play DJI HD Support – Without soldering for easy installation. built-in HD OSD, keeping track of flight status.
- Multi-Peripheral Friendly – With 5V/2A and 10V/2A BEC outputs for different peripherals such as GPS, LED strip, buzzer, etc.
- Lower Latency – Smoother operating, faster calculation, and sensitive response with STM32F7 MCU and MPU6000 gyro sensor.
- Lower Heat Generation – VTX switch function that can turn off the VTX remotely to reduce heat generation and interference.
- Simple Tuning Experience – Compatible with Betaflight firmware and can be configured via Betaflight Configurator software.
