What is cinewhoop drone?
Cinewhoops are a special kind of mini FPV drone that have ducts for the propeller guards and can carry action cameras like GoPros for shooting fluid airborne footage. Cinewhoops prioritize stability and safety while not being as quick as 5′′ freestyle FPV drones, letting pilots to safely fly close to their subjects both indoors and outdoors. With a 5′′ quad air drone, it is almost impossible to produce film with the degree of cinematic quality that was achieved here.
Advantages of cinewhoop
- Safe indoor flying with additional safety provided by propeller guards
- Ability to fly slowly and smoothly, perfect for getting unhurried cinematic shots
- Due of their reduced size and weaker components, they are cost-effective.
Disadvantages of cinewhoop
- shorter flight periods as a result of the combination of an inefficient propeller motor and additional weight.
- slower and less agile than standard freestyle drones
- Although steady cruising is one of my strong suits, it’s not the best option for freestyle maneuvers.
Factors to consider when choosing cinewhoop parts
There are four sizes of cinewhoops: 20, 25, 30, and 35. These numbers represent the sizes of the propellers: 20, 25, 30, and 35 are 2-inch, 2.5-inch, and 3.5-inch, respectively. In this part, I will introduce how to choose cinewhoop parts and recommendations according to different size.
Prop Size Selection
How to choose different props for cinewhoop
Propellers are reasonably priced, therefore the easiest way to choose the finest one is to test a variety of possibilities with your particular setup. Take into account the following elements when assessing propellers:
- Efficiency: How does flight time depend on the propeller?
- Noise level: Quieter propellers are less likely to disturb adjacent residents.
- Power: Evaluate the amount of push generated and the amount of throttle needed to keep the craft hovering.
- Smoothness: Check to see whether the propeller is causing any further vibration.
- Responsiveness: Evaluate the responsiveness of the propeller to see if it enhances flight performance.
The Best 2-inch Props for cinewhoops
The Emax Avan 3-blade appears to offer the best performance and efficiency ratio. Given the remarkable efficiency advantage for the 50% and 75% throttle range (cruising speed), you should receive an incredible amount of flight time with them.
Both the Gemfan 20354 and the Gemfan 20364 are excellent choices for raw power, with the 2035 being somewhat more efficient at the sacrifice of a few grams of thrust; this makes sense given the lower pitch. However, for these, you might want to utilize larger motors than the 1105. They are better suited for bigger designs because they are heavy props that need more torque to spin.
The Best 2.5-inch Props for cinewhoops
I believe the Azure 25403 is the best 2.5’’ prop. Across the whole throttle range, it is one of the most effective props, providing extremely lengthy flying times while still producing very acceptable power (thrust).
The Emax Avan 2.5 inch, which is the absolute powerhouse and provides the most thrust when fully throttled while maintaining respectable efficiency, is my second favorite.
The Best 3-inch Props for cinewhoops
GEMFAN D76 DUCTED 76MM 5 BLADE props provide the best balance of force, noise level, balance, efficiency, and mounting options (t-mount or M5) after testing all of the cinewhoop props.
Motor selection
When cinewhoops first came out, the only real possibilities were 1408’s and 1507’s because there were so few micro motors with enough stator volume to raise such a large platform. They were OK on the 250-ish gram rigs they were designed for, but these extremely tall and narrow motors have cooling issues when used in big designs, where you need at least 500 grams of thrust to always even get off the ground.
The Best 2.5 inch motors for cinewhoops
To find the ideal motor and propeller combination, a variety of build modifications have been developed and carefully tested between 1106 and 1408. 1106 could fly, but they quickly lose their ability to do so and start to get rather warm. Although some high pitch propellers allow for worry-free racing and freestyle, they only ensure 3-4 minutes of furious flying, which is actually not the frame’s primary goal. 1408 is obviously too many for Cinewhoop. You are conscious of your ability, though. MEPS 1404 Brushless Motor are recommended for best 2.5 inch motors for cinewhoop.
The Best 3 inch motors for cinewhoops
MEPS SPACE 2004 FPV brushless motors are suitable for 4S 6S cinewhoop, which is 1800kv brushless motor and 3000kv brushless motor available. MEPS motor 2004 3000KV are recommended. Just enough stator volume, kv, and motor cogging are used to support any action camera on a 4S, and this results in video that is crystal clear and free of jello. 1800kv brushless motor may suitable for 6s cinewhoop better.
Battery selection
The motor KV, propeller size, weight, and intended flight time are just a few of the variables that must be taken into consideration when choosing the correct battery for your Cinewhoop. As Cinewhoops primarily concentrate on shooting smooth and relaxing film, rather than aggressive flying, you don’t require an excessively large or expensive battery with an exceptionally high C-rating often used for racing. TATTU R-LINE 1050MAH 95C 4S XT60 is the perfect weight for more aggressive flying or higher cruising speeds, offering 4 to 6 minute run periods at just 117 grams.
Frame selection
Beta95X V3 2.5 inch Frame
The BetaFPV 95X V3’s design has changed SO MUCH from the previous iteration; it now appears more polished and expert. There aren’t any antennas or cords protruding from the outside, so it almost seems like a DJI drone.
iFlight BumbleBee V3 3 Inch Frame
Your drone will be more sturdy and durable with the iFlight BumbleBee V3 3 Inch 145mm Frame Kit’s lightweight, low resonance frame design. Its 111 x 93 mm LED-compatible body has bottom plates that are 2.5 mm thick and top plates that are 2 mm thick, with a 27 mm gap between them to accept propellers up to 3 inches in size.
ESC & FC selection
Although Cinewhoop frames are small, they lack the strength to support weight. For this reason, you require ESCs that are capable of handling larger voltages and currents than the typical hobby-grade electronics.
The most popular option for CineWhoops is the Flight Controller with 2020 stacks because it will be lighter than 30.530.5 stack systems, which frequently employ 6S batteries or more potent motors/props necessitating higher voltage output from the battery pack being used on them.
Mamba F722 Mini Betaflight Flight Controller & Mamba F40 MINI ESC is ideal for micro quad FPV racing. With its incredibly lightweight and small size, this set can be quickly attached to the top of any frame or stack of your quadcopter without taking up a lot of room.
How to choose different camera for different size of cinewhoop?
Smaller cinewhoops can fit through smaller openings since they are more portable, lighter, less intimidating, and easier to take around. On the other hand, bigger cinewhoops have more strength, can withstand high gusts better, offer more stability outside, and can carry heavier payloads like a full-sized GoPro.
Bare GoPro for 2 inch cinewhoop
A 2-inch cinewhoop (size 20) is the best option if you want to stay within the 250g restriction. Usually, you can stay under 250 grams with a battery and a bare GoPro. They couldn’t lift a full-size GoPro because it was too heavy. The requirement for a separate action camera can be eliminated if you choose a model with a DJI O3 Air Unit, resulting in a smaller setup that can still record high-quality video.
Naked GoPro for 2.5 or 3 inch cinewhoop
It is advised to use a 2.5-inch or 3-inch cinewhoop (sizes 25 or 30) when carrying a Naked GoPro or GoPro Bones. With the action camera and batteries, these sizes will probably weigh more than the allotted 250 grams, but they are superior for outside handling, speed, and stability. A full-sized GoPro may fit in a 3-inch cinewhoop, but its performance will probably suffer. The 3-inch would likely perform better than the 2.5-inch if you intended to fly indoors only; however, the 2.5-inch can fit into more locations and you won’t need the additional power that the 3-inch’s larger propellers provide.
Full-sized GoPro for 3.5 inch cinewhoop
The best option for outside flying with a full-sized GoPro, such as the GoPro Hero 11 Black, is a 3.5-inch (size 35) cinewhoop.
Recommendations of best RTF cinewhoop in 2024
GEPRC 2 inch cinewhoop
The CineLog20 advances the CineLog series because to its lightweight pusher construction and better camera gimbal vibration reduction technique, which also provides a perfect mounting platform for O3 Air Unit shooting, which can give an excellent anti-shake effect. The one-piece injection molding camera mount allows you to quickly mount GEPRC bare GoPro 8/9/10/11 cameras, Action2, insta360 Go2, Peanut, and other portable action cameras.
SpeedyBee 2.5 inch cinewhoop
The SpeedyBee Flex25’s novel frame design with overlapping propellers allows it to fit a small 2.5″ cinewhoop into a 2-inch form factor. The wireless Betaflight setup via the SpeedyBee mobile app, which enables simple setting without using a PC, is another noteworthy feature. It has a flight time of about 5 minutes with a 4S 850mAh LiPo and weighs between 169g and 246g (with 4S 450mAh with Runcam Thumb Pro).
DJI Avata 3 inch cinewhoop
The DJI Cinewhoop 3-inch DJI Avata is its property. You can be brave and fly high because to the DJI Avata’s long-lasting constructio. The ground-breaking ducted aerodynamic design, which maximizes power effectiveness, allows for the astounding flying time of up to 18 minutes. The DJI Avata’s adaptability in various circumstances opens up a world of possibilities.