NEWBetaFPV F4 2-3S 20A AIO V1 Brsushless Flight Controller
● Designed for HD VTX.
● DJI O3 6-pin PMU.
● 20A ESC.
● Cutoff Power.
● External Edvice.
● Designed for HD VTX.
● DJI O3 6-pin PMU.
● 20A ESC.
● Cutoff Power.
● External Edvice.
The BetaFPV F4 2-3S 20A AIO Flight Controller is designed for enhanced performance with HD VTX systems. It supports 2-3S battery configurations, optimizing your flight experience. This flight controller features a dual BEC solution, providing stable power outputs of 9V at 2A for DJI O3 and 5V at 3A for additional external devices. Equipped with a 20A ESC, it ensures agile and dynamic flight capabilities. The integrated connector for DJI O3 HD VTX and a USB port streamline installation and maintenance. This flight controller is ideal for HD VTX whoop enthusiasts, offering a superior level of professionalism and convenience.
Features:
● Designed for HD VTX: F4 2-3S 20A AIO V1 Brushless Flight Controller is designed for HD VTX, which features a dual 9V@2A for DJI O3 and 5V@3A for external device BEC solution to prevent screen blackout on the DJI O3 due to low voltage during throttle increase.
● DJI O3 6-pin PMU: It includes a new DJI O3 6-pin PMU for easy installation without soldering, reducing assembly complexity. And redesigned solder pad layout ensures larger, more secure pads for easy and reliable soldering, while the relocated USB port at the rear facilitates computer tuning. Newbie friendly.
● 20A ESC: The power range of 2-3S provides increased thrust and improved control with a 20A ESC featuring a single NMOS for continuous current capability.
● Cutoff Power: The upgraded onboard receiver allows selective power cutoff for saving power and offers additional UART TX3 and RX3 ports for connecting the external device.
● External Edvice: It features an STM32F405RGT6 chip, Integrate Serial ELRS 2.4G receiver, 16M black box, barometer, current meter, reserve 3 complete serial ports and a standard SBUS, support GPS, HD VTX, external receiver, and other equipment.
Specifications:
● Model: F4 20A AIO
● Weight: 5.58g
● Mounting Hole Size: 26mm x 26mm
● CPU*: STM32F405RGT6 (168MHz)
● Six-Axis: ICM42688P (SPI connection)
● RX: Serial ELRS 2.4G Receiver
● RX firmware version: BETAFPV AIO 2400 RX ELRS V2.5.2
● Antenna: Enameled wire
● Blackbox Memory: 16MB
● Sensor: Barometer(BMP280/DSP310), Voltage&Current
● 5V BEC: 5V 3A@8V supply
● 9V BEC: 9V 2A@8V supply
● USB Port: SH1.0 4-Pin
● Built-in ESC with 20A continuous and peak 25A current
● ESC input voltage: 2-3S
● FC firmfware version: Betaflight_4.4.1_BETAFPVF405
● ESC firmware: C_X_70_48_V0.19.2.hex for BB51 Bluejay hardware
● Signal support: D-shot300, D-shot600
Product recommendation:
Package included:
● 1* BetaFPV F4 2-3S 20A AIO V1
Parameter
Recommendations
Any questions about products, free to ask.