BETAFPV ExpressLRS ELRS Nano 2.4G / 915Hz Receiver Long Range Latency

About BETAFPV ExpressLRS ELRS Nano 2.4G / 915Hz Receiver

The BETAFPV Nano receiver is based on the ExpressLRS project, an open source RC link for RC applications. ExpressLRS is designed to achieve better link performance in terms of speed, latency and range. This makes ExpressLRS one of the faster RC links available while still providing remote performance.

Features:

● A ton of ExpressLRS items are available now!

● For micro drones, high recommend the smaller Lite receiver.

● Recommend ExpressLRS Recovery Dongle for unbricking the receiver.

● Choosing a suitable receiver to fly quadcopter or other RC models is very important. 

● This Receivers including ELRS Lite, Nano, Micro, and the newest SuperD, greatly fulfill pilots' requirements for FPV flying.

Nano receiver 2.4G/915MHz version diagram as shown below.

Enable the corresponding UART (e.g. UART3 below) as a Serial Rx on Betaflight Configurator "Ports" tab.

On the "Configuration" tab, select "Serial-based receiver" on the "Receiver" panel, and select "CRSF" as the protocol. Telemetry is optional here and will reduce your stick update rate due to those transmit slots being used for telemetry.

Nano receiver could enter binding status by power on/off three times.

● Plugin and unplug nano receiver three times;

● Make sure the LED is doing a quick double blink, which indicates the receiver is in bind mode;

● Make sure the RF TX module or radio transmitter enter binding status, which sends out a binding pulse;

● If the receiver has a solid light, it's bound.

Note: Binding once and the receiver will store the binding information. Re-power and the connect successfully auto.

The connection between the ELRS Nano receiver and the FC board is shown below.

Specification:

● Weight: 0.7g (receiver only)

● Size: 12mm*19mm

● Telemetry power: 20dbm (100mW, 2.4G Version)

● Frequency bands (2.4G version): 2.4GHz ISM

● Frequency bands (915MHzversion): 915MHz FCC

● Input voltage: 5V

● Antenna connector: IPEX MHF

Product Recommendation:

● MEPS SZ 2306 Brushless Motor

● MEPS SZ F7 mini Flight Controller

● MEPS SZ 45A mini FPV ESC

● MEPS SZ 4942 FPV Propeller

Parameter Data

Product Recommendation